Alphard Club Booster Not Working? Troubleshooting Tips & Fixes

Congcheng Yang
Alphard Club Booster not working

🧠 Don’t Panic — Start with These Simple Fixes

If your Alphard Club Booster V2 isn’t powering on or responding correctly, it’s often something minor. This quick troubleshooting guide will help you diagnose and resolve the most common issues — no tech support required.

Let’s get your round back on track.

⚡ Issue #1: Booster Won’t Turn On

Possible Causes:

  • Battery not connected properly

  • Battery not charged

  • Loose power cable

Fixes:

  • Ensure battery is firmly clicked into place

  • Try a different wall outlet and confirm LED indicator shows charging

  • Check power button — hold for 3–5 seconds to power on

🎮 Issue #2: Remote Not Syncing

Possible Causes:

  • Sync was never completed

  • Remote lost pairing after charging

  • Outdated firmware (rare)

Fixes:

  1. Turn on both the Club Booster and remote

  2. Hold the sync button on the remote for 5+ seconds until LEDs flash

  3. Wait for steady light to confirm connection

  4. If unsuccessful, try a hard reset (see manual)

🛞 Issue #3: One or Both Motors Not Engaging

Possible Causes:

  • Loose wheel connection

  • Debris blocking rotation

  • Internal motor cable disconnected

Fixes:

  • Remove and reattach the wheel(s) securely

  • Check axle and motor housing for debris or twigs

  • Contact Alphard support if clicking or grinding is present

⏱️ Issue #4: Stops or Slows Unexpectedly

Possible Causes:

  • Battery low

  • Overheating safety mode

  • Terrain too rough or incline too steep

Fixes:

  • Recharge battery

  • Let unit cool down for 10–15 minutes

  • Avoid long, steep climbs under full load

  • Use cruise mode for smoother pacing

📡 Issue #5: Intermittent Remote Response

Possible Causes:

  • Distance too far from unit

  • Interference from nearby electronics

  • Weak remote battery

Fixes:

  • Stay within 10–15 yards of your unit

  • Replace remote battery

  • Avoid pairing remote near other Bluetooth or radio devices

🔧 Additional Tips for Smooth Operation

  • Store battery indoors when not in use

  • Clean wheels and axles after muddy or wet rounds

  • Charge fully before every round to prevent range anxiety

  • Update firmware if prompted (check Alphard’s official site)

🛒 Need Replacement Parts?

Visit our Alphard Golf Collection for Club Booster kits, brackets, remote replacements, and accessories to keep your gear in top shape.

📚 Related Blogs to Explore: