Alphard Club Booster Setup Guide: How to Install and Get Rolling

Congcheng Yang
Alphard Club Booster setup guide

🔧 Turning Manual Into Motorized — Fast

The Alphard Club Booster V2 is designed to be a hassle-free upgrade — no engineering degree required. With the correct bracket, most users can complete setup in under 10 minutes.

Here’s everything you need to get started, from unboxing to your first powered round.

📦 What’s in the Box?

Your Alphard Club Booster V2 kit should include:

  • Club Booster V2 motor unit

  • Remote control

  • Charging cable

  • Wheel set (if not already attached)

  • Quick start guide

Bracket kits are sold separately depending on your pushcart model. Browse available brackets in our Alphard Golf Collection.

🛠 Step-by-Step Installation Guide

1. Attach the Bracket to Your Pushcart

Install the brand-specific bracket (Clicgear, Bag Boy, Sun Mountain, etc.) following the included instructions. This usually involves:

  • Removing the rear wheels

  • Attaching the mounting arms or axle adapter

  • Securing with screws or clamps

Pro Tip: Use a level surface and take your time. A secure fit ensures smooth performance.

2. Mount the Alphard Club Booster

Slide the Club Booster’s mounting points into the installed bracket arms. Lock it in place using the quick-release latches.

3. Connect the Battery

Insert the battery into its compartment and plug it into the power cable. It should click into place and power on via the main button.

4. Sync the Remote

Turn on both the Booster and remote. Hold the sync button until the LED lights pair — this usually takes 5–10 seconds.

5. Perform a Quick Test

Before heading to the course, test forward, reverse, stop, and turning functions in a driveway or backyard to get familiar with handling.

🔋 Charging Tips

  • Full charge takes ~4 hours

  • Use the included charger only

  • LED indicator will turn green when charging is complete

  • Store indoors when not in use

🎮 Remote Control Basics

Your Alphard remote allows you to:

  • Start/stop motion

  • Turn left/right

  • Adjust walking speed

  • Set cruise mode

  • Park while putting

It’s compact, intuitive, and attaches to your bag or belt clip for easy access mid-round.

🧰 Troubleshooting Setup Issues

If your unit doesn’t power on or sync:

  • Double-check battery is fully seated

  • Re-pair the remote using the reset function

  • Inspect cable connections for debris

  • Make sure you’re using the correct bracket kit

Still stuck? Reach out to Alphard support or consult the full manual included in your kit.

⛳ You're Ready to Roll

Once installed, the Alphard Club Booster V2 becomes a seamless part of your gear. Take it for a spin, learn the remote pacing, and enjoy walking 18 holes like never before.

Explore all Alphard parts and accessories in our Alphard Golf Collection to customize your ride.

📚 Related Blogs to Explore: